IBM XStation 130 Set Up And Operation Manual page 49

Selecting Screen Size and Shades
Various supported IBM displays offer increased resolution and shades (colors) capability
when optional video memory is installed. Alternate resolution and shades capability are
selected from the terminal configuration screen. (Refer to "Select Screen Resolutions and
Shades" on page 3-10.)
Display Monitor Type Resolution
Colors-Shades Min. Diag. Test
(10) (hz/vert pixels)
Bits per Pixel Video Screen Char
Memory
Test
8503 Hex 07 640 x 480 1,2,4, or 8
*
1 MB
80 x 30
8507 Hex 06 640 x 480 1,2,4,or8 1 MB
80 x 30
1024 x 768 1,2,4, or 8
*
1 MB
64 x 24
8508 HexOD 1024 x 1024 1,2,4, or 8
1 MB 64x 32
1280 x 1024 1,2, or 4 * 1 MB 80 x 32
1,2,4, or 8 * 2MB 80 x 32
1600 x 1200 1, or 2 1 MB 100 x 37
1,2, or 4 2MB 100 x 37
8512/8513 Hex OB 640 x 480
1, 2, 4, 8
*,
or 16
1 MB 80 x 30
8514 HexOA 640 x 480 1,2,4,8,or16 1 MB 80 x 30
1024 x 768 1,2,4, or 8
*
1 MB 64x 24
1, 2, 4, 8
*,
or 16 2MB 64 x 24
8515
HexOE 640 x 480 1,2,4,8,or16 1 MB
80 x 30
1024 x 768
1,2,4, or 8
*
1 MB 64x 24
1, 2, 4, 8 *, or 16 2MB 64 x 24
5081 (RPQ) Hex 01 1024 x 1024 1,2,4,or8 1 MB 64x 32
/6091
1280 x 1024
1,2, or 4
*
1 MB 80 x 32
1,2,4, or 8 * 2MB 80 x 32
Notes:
1. The
*
in the colors-shades bits per pixel column indicates the default setting.
2. The IBM 6091 display requires an FCC-required signal cable such as IBM PIN
58F2901 or equivalent be used; its mode switch set to position 2; and its sync
input impedance switch set to position 1.
The bits per pixel setting selects the color-shades as follows:
Bits/Pixel Color-Shades
2
2 4
4 16
8
256
~
16 65,536
To select an alternate resolution or shade (color) capability, go to "Starting Diagnostics"
on page 3-9 and follow the procedure to select
Terminal Configuration.
Operating the Xstation
2-9