IBM XStation 130 Set Up And Operation Manual page 22

3. Place the display in close proximity to the Xstation system unit and plug the display cable
into the Xstation I/O panel as shown. Some displays may require special connections, so
be sure to consult the display's setup manual.
4. If your Xstation has had all options installed prior to delivery, continue to "Step 14.
Connect the Cables" on page 1-21.
5. To install an option or reconfigure the Xstation, continue to "Step 3. Installing Options and
Reconfiguring " on page 1-5. ~
1·4
Setup and Operator Guide