IBM XStation 130 Set Up And Operation Manual page 25

Step 5. Install a Token-Ring or Dual Async Adapter
The Xstation supports the following optional adapters:
• IBM Token-Ring Network 16/4 Adapter/A
• IBM Personal System/2 Dual Async Adapter/A
One of the optional adapters may be plugged into the system board through the riser card
assembly.
Do you want to install a Token-Ring or a Dual Async Adapter?
No
Go to "Step 6. Install Video Memory Upgrade Kits" on page 1-10.
Yes After completing "Step 4. Remove the Chassis Assembly" on page 1-6,
perform the following steps:
1. Loosen the knob which anchors the EMI bracket to the I/O panel, and remove the
bracket.
I/O Panel
EMI Bracket
V
ET
~s
P
M K
Ie>
<===>
O~<~=:::;:-->-<'?==~>~O~O~1
~.
2. Use a screwdriver to pry out the breakout panel. Discard the breakout panel.
CONTINUE
Setup
1-7