IBM XStation 130 Set Up And Operation Manual page 63

Error Analysis
If the fan is not running, refer to "Recommended Action (RA 1)"on page 3-7. If a problem is
detected during the Power-On-Self-Test (POST), the normal one audio beep may not be
heard and the following screen should appear:
POST Check Points
Video Memory
1024KB (Minimum)
Display Processor
Memory
1024KB (Minimum)
XXXXXKBOK
XXXX
POST Screen
.~
Error Code
If more than one error code is displayed, refer to the non-eonfiguration error codes in the
order displayed.
If you have recently changed configuration and the error code displayed is a configuration
error code 161 through 170, press the F1 key to update the configuration.
If you have not recently changed your Xstation configuration, find the error code in the
following table and take the indicated action. If the problem persists, record all of the
information that identifies the problem and refer to "Recommended Action (RA)" on page
3-7.
CONTINUE
Problem Deterination Procedures
3·3