Using The Quick Setup Wizard - Watchguard Firebox X20E User Manual

Using the Quick Setup Wizard

The Quick Setup Wizard starts after you type https://192.168.111.1 into the URL or address field of
your Internet browser. If your browser blocks pop-up windows, you must disable that function to com-
plete the Quick Setup Wizard. You must use the wizard to configure the Ethernet interfaces. You can
change the configuration of the interfaces after you use the wizard.
The Quick Setup Wizard includes this set of dialog boxes. Some dialog boxes appear only if you select
certain configuration methods:
Welcome
The first screen tells you about the wizard.
Configure the External Interface of your Firebox
Select the method your ISP uses to assign your IP address.
Configure the External Interface for DHCP
Type your DHCP identification as supplied by your ISP.
Configure the External Interface for PPPoE
Type your PPPoE information as supplied by your ISP.
Configure the External Interface with a static IP address
Type your static IP address information as supplied by your ISP.
Configure the Trusted Interface of the Firebox
Type the IP address of the trusted interface.
Set the User Name and Passphrase
Enter a user name and passphrase for the administrator account for the Edge.
Set the Wireless Region
(For wireless models only.) Type the country or region in which the Firebox® X Edge e-Series
Wireless is being used. The country or region cannot be changed after it is set.
Set the Time Zone
Use this screen to set the time zone the Firebox X Edge is operating in.
Enter the feature key
Paste the feature key text that you copied from the LiveSecurity web site into the empty field.
The Quick Setup Wizard is complete
The Quick Setup Wizard shows a link to the WatchGuard web site to register your product. After
you complete the wizard, the Firebox X Edge restarts.
If you change the IP address of the trusted interface, you must change your network settings so that your IP
address matches the subnet of the trusted network before you connect to the Firebox X Edge again. If you
use DHCP, restart your computer. If you use static addressing, see "Using a static IP address" on page 18.
The System Status page
The System Status page appears on the screen. You can configure more features of your Edge
from this page.
User Guide
Using the Quick Setup Wizard
19