AC power adapter
The AC power adapter supplies power for the Firebox X Edge e-Series. You must use the correct plug
for the AC power adapter for the power source used in your country.
The international plug kit includes four plugs: Q-NA (North America), Q-UK (United Kingdom), Q-EU
(European Union), and Q-SAA (Asia).
Removing a plug from the AC power adapter
If the plug installed in the AC power adapter does not match your power source:
Use your thumb or finger to move the locking key on the AC power adapter down.
1
Hold the bottom of the plug.
2
Pull up from the bottom of the plug to remove it from the AC power adapter.
3
Connecting a plug to the AC power adapter
To install a different plug in the AC power adapter:
Put the top of the new plug in the AC power adapter at a 45-degree angle.
1
You must put in the top of the new plug first. Do not use force to put the plug into the adapter.
Push the bottom of the new plug into the AC power adapter.
2
The plug clicks into position.
About the Firebox X Edge e-Series Wireless
The Firebox X Edge e-Series Wireless conforms to IEEE 802.11g/b wireless LAN standards. Some key fea-
tures that have an effect on performance of an 802.11g/b wireless device include antenna directional
gain, signal attenuation (path loss), and channel data rate.
Antenna directional gain
Antenna directional gain is based on the shape of the radiation pattern around the antenna. The Fire-
box X Edge e-Series Wireless uses two 5.1 dBi swivel-mount whip antennas. The whip antenna has a
User Guide
About the Firebox X Edge e-Series Wireless.
.
235