The Zonealarm Personal Firewall - Watchguard Firebox X20E User Manual

Configuring IPSec Mobile User VPN
Using Connection Monitor
Connection Monitor shows statistical and diagnostic information for connections in the security policy.
This window shows the security policy settings and the security association (SA) information. The mon-
itor records the information that appears in this window during the phase 1 IKE negotiations and the
phase 2 IPSec negotiations.
From the Windows desktop system tray:
Right-click the Mobile User VPN client icon.
1
Select Connection Monitor.
2
The Connection Monitor window appears.
An icon appears to the left of the connection name:
SA tells you that the connection has only a phase 1 SA. A phase 1 SA is assigned in these
•
situations:
- for a connection to a secure gateway tunnel
- when a phase 2 SA connection has not been made at this time
- when a phase 2 SA connection cannot be made
A key tells you that the connection has a phase 2 SA. This connection also can have a phase 1 SA.
•
An animated black line below a key tells you that the client is sending or receiving secure IP
•
traffic.
A single SA icon with more than one key icon above it shows a single phase 1 SA to a gateway
•
that protects more than one phase 2 SAs.

The ZoneAlarm Personal Firewall

ZoneAlarm® Personal firewall protects your computer and network with a simple rule: Block all incom-
ing and outgoing traffic unless you explicitly allow that traffic for trusted programs.
When you use ZoneAlarm, you frequently see New Program alert windows. This alert appears when a
software application tries to get Internet or local network access. This alert stops data from your com-
puter without your authorization.
The ZoneAlarm personal firewall includes a tutorial after the MUVPN client is installed. Read the tutorial
to learn how to use this software application.
222 Firebox X Edge e-Series