Distributing The Software And The .Wgx File - Watchguard Firebox X20E User Manual

Distributing the software and the .wgx file

You must give the remote user the MUVPN software installer and the end-user profile, or .wgx file.
Get the MUVPN installation files from the WatchGuard web site
You must log in to the LiveSecurity® Service at
software. After you log in, go to the Latest Software area and select Firebox X Edge in the Choose
Product Family area. There are two different versions of IPSec Mobile User VPN software. One version
contains the ZoneAlarm® personal firewall and the other one does not.
Get the user's .wgx file
The Firebox X Edge has encrypted IPSec MUVPN client configuration (.wgx) files available for down-
load.
To connect to the System Status page, type https:// in the browser address bar, and the IP
1
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
From the navigation bar, select Firebox Users.
2
Below Secure MUVPN Client Configuration Files, select the .wgx file to download by clicking
3
on the link username.wgx where username is the Firebox user's name.
At the prompt, save the .wgx file to your computer.
4
User Guide
Configuring IPSec Mobile User VPN
http://www.watchguard.com/support to download the
213