Editing Common Packet Filter Policies
Find the common policy you want to allow or deny. From the Filter drop-down list adjacent to
3
the policy name, select Allow, Deny, or No Rule.
If you select No Rule, that policy is disabled and the Edge uses the default behavior, which is to
deny incoming traffic and allow outgoing traffic.
Editing Common Packet Filter Policies
You can edit some default settings of a common packet filter policy.
On the Incoming tab, you can define a service host, redirect the port, enable logging, or restrict the IP
addresses on the external network that can connect to a computer behind the Firebox X Edge e-Series.
On the Outgoing tab, you can enable logging and restrict the IP addresses on the trusted or optional
networks that can connect to the external network with this policy in the From field. You can also
restrict the external IP addresses to which trusted or optional computers can connect to in the To field.
To edit a common packet filter policy:
To connect to the System Status page, type https:// in the browser address bar, and the IP
1
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
94
Firebox X Edge e-Series