Dvcp Client Wizard - Watchguard Firebox X1000 Reference Manual

CHAPTER 10: Field Definitions

DVCP Client Wizard

Name and Key screen
Access and Connections screen
Encryption and Authentication screen
182
Enter Client Name
Enter the name to be assigned to the network client. This name is
used to identify the client in administration and monitoring tools
such as System Manager and VPN Manager.
Enter Shared Key
Enter a shared key for this client's DVCP account.
Allow Client Access To
Using slash notation, enter the address of the primary network to
which the client has access behind the Firebox.
Telecommuter IP Address
Select only for WatchGuard SOHO Telecommuter devices. Enter
the virtual IP address of the Telecommuter on the internal
network of the Firebox.
Private Network
Select for private network devices. Enter the IP address of the
private network.
Type
Select the type of encryption:
Encapsulated Security Payload
Authentication Only
Authentication
Select the type of authentication from the drop list.
None - No authentication
MD5-HMAC - 128-bit algorithm
SHA1-HMAC - 160-bit algorithm
WatchGuard Firebox System