Enabling Spamblocker; Configuring Spamblocker Settings - Watchguard Firebox X20E User Manual

Enabling spamBlocker

To connect to the System Status page, type https:// in the browser address bar, and the IP
1
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
From the navigation bar, select spamBlocker > Settings.
2
The spamBlocker Settings page appears.
To enable spamBlocker for POP3, select the Enable spamBlocker for POP3 proxies check box.
3
To enable spamBlocker for SMTP, select the Enable spamBlocker for SMTP proxies check box.

Configuring spamBlocker Settings

You set actions for spamBlocker to take with POP3 email and SMTP email the same way. To set actions
for POP3 email, use the POP3 tab; to set actions for SMTP email, use the SMTP tab.
From the Spam drop-down list, select Allow or Add a subject tag. The default action is Allow. If
1
you choose Add a subject tag, a text box appears with the default tag
change this tag to some text you prefer.
From the Bulk drop-down list, select Allow or Add a subject tag. The default action is Allow.
2
The default tag is
User Guide
. You can change this tag to some text you prefer.
***BULK***
Configuring spamBlocker Settings
***SPAM*** . You can
187