Monitoring The Ipsec Muvpn Client Connection - Watchguard Firebox X20E User Manual

The IPSec MUVPN client started one or more secure MUVPN tunnels. The green and red bars on
the right of the icon tell you that the client is sending either secure or not secure data.
Allowing the MUVPN client through a personal firewall
To create the IPSec MUVPN tunnel, you must allow these programs through the personal firewall:
MuvpnConnect.exe
•
IreIKE.exe
•
The ZoneAlarm personal firewall detects when these programs try to get access to the Internet. A New
Program alert window appears to request access for the MuvpnConnect.exe program.
From the New Program alert window, select the Remember this answer the next time I use this pro-
gram check box and click Yes. This option makes the ZoneAlarm personal firewall allow Internet access
for this program each time you start a MUVPN connection. The New Program alert window appears to
request access for the IreIKE.exe program.
Disconnecting the MUVPN client
From the Windows desktop system tray:
Right-click the MUVPN client icon and select Deactivate Security Policy.
1
The MUVPN client icon with a red bar is shown.
If the ZoneAlarm personal firewall is active, deactivate it now by following the subsequent
2
instructions.
From the Windows desktop system tray:
Right-click the ZoneAlarm icon shown at right.
1
Select Shutdown ZoneAlarm.
2
The ZoneAlarm window appears.
Click Yes.
3

Monitoring the IPSec MUVPN Client Connection

Log Viewer and Connection Monitor are installed with the IPSec MUVPN client. These tools let you
monitor the IPSec MUVPN connection and troubleshoot problems.
Using Log Viewer
Use Log Viewer to show the connections log. This shows the events that occur when the IPSec MUVPN
tunnel is started.
From the Windows desktop system tray:
Right-click the Mobile User VPN client icon.
1
Select Log Viewer.
2
The Log Viewer window appears.
User Guide
Activated, Connected, and Transmitting both Secured and Unsecured Data
Configuring IPSec Mobile User VPN
221