Adding A Traffic Control Filter - Watchguard Firebox X20E User Manual

Configuring Traffic Control
If you want to use Traffic Control marking, select IP Precedence or DSCP from the Marking Type
7
drop-down list. You can then select the mark you want applied for each traffic category with the
Mark drop-down list at the top of each traffic category.
Click Submit.
8
Traffic control is enabled.

Adding a traffic control filter

Before you add a traffic control filter to allow or deny traffic for a program, you must know the port
numbers that the program uses to send data. If you do not know the port numbers, see the documen-
tation for the program.
Click the Add button adjacent to the traffic category.
1
The Add Traffic Control dialog box appears.
140 Firebox X Edge e-Series