Windows Xp Setup - Watchguard Firebox X20E User Manual

Configuring IPSec Mobile User VPN
Select the Client for Microsoft Networks network client and click OK.
3
Configuring WINS and DNS settings on Windows 2000
The remote computer must be able to connect to the WINS and DNS servers. These servers are on the
trusted network protected by Firebox X Edge e-Series.
From the connection window Networking tab:
Select the Internet Protocol (TCP/IP) component and click Properties.
1
The Internet Protocol (TCP/IP) Properties window appears.
Click Advanced.
2
The Advanced TCP/IP Settings window appears.
Click the DNS tab and from the section labeled DNS server addresses, in order of use, click
3
Add.
The TCP/IP DNS Server window appears.
Type the IP address of the DNS server and click Add.
4
To add more DNS servers, repeat steps 3 and 4.
The DNS server on the private network of the Firebox X Edge must be the first server in the list.
Select the Append these DNS suffixes (in order) radio button and click Add.
5
The TCP/IP Domain Suffix window appears.
Type the domain suffix and click Add.
6
If you want to add more DNS suffixes, repeat steps 5 and 6.
7
Click the WINS tab. From the section WINS addresses, in order of use, click Add.
8
The TCP/IP WINS Server window appears.
Type the IP address of the WINS server and click Add.
9
To add more WINS servers, repeat steps 8 and 9.
Click OK to close the Advanced TCP/IP Settings window. Click OK to close the Internet Protocol
10
(TCP/IP) Properties window.
Click OK to close the connection properties window.
11

Windows XP setup

Use this section to install and configure the network components for the Windows XP operating sys-
tem. You must install these components if you use the MUVPN client on a Windows XP computer. From
the Windows desktop:
Select Start > Control Panel.
1
The Control Panel window appears.
Double-click the Network Connections icon.
2
Right-click the connection you use to get Internet access and select Properties.
3
The connection properties window appears.
Make sure these components are installed and enabled:
4
- Internet Protocol (TCP/IP)
- File and Printer Sharing for Microsoft Networks
- Client for Microsoft Networks
To enable a component, click the adjacent check box. If a component is not installed, follow the
instructions to install it.
216 Firebox X Edge e-Series