Installing And Configuring The Ipsec Muvpn Client - Watchguard Firebox X20E User Manual

Configuring IPSec Mobile User VPN
Select the Append these DNS suffixes (in order) radio button.
8
Below the radio button, click Add
9
The TCP/IP Domain Suffix window appears.
Enter the domain suffix for your network's private domain and click Add.
10
If you want to add more DNS suffixes, repeat steps 9 and 10.
11
Click the WINS tab.
12
From the section WINS addresses, in order of use, click Add.
13
The TCP/IP WINS Server window appears.
Type the IP address of the WINS server and click Add.
14
To add more WINS servers, repeat steps 13 and 14.
Click OK to close the Advanced TCP/IP Settings window. Click OK to close the Internet Protocol
15
(TCP/IP) Properties window.
Click OK to close the connection window.
16

Installing and configuring the IPSec MUVPN client

To install and configure the MUVPN client, you must have local administrator rights on the remote
computer.
Installing the MUVPN client
No other IPSec VPN client software can be active on the remote computer. Remove any other
1
IPSec VPN software from the user's computer before you install the WatchGuard® MUVPN
software.
Copy the MUVPN installation program and the .wgx file to the remote computer.
2
Double-click the MUVPN installation file to start the InstallShield wizard.
3
Click Next.
4
If the InstallShield shows a message about read-only files, click Yes to continue the installation.
5
A welcome message appears. Click Next.
6
The Software License Agreement appears.
Click Yes to accept the license agreement.
7
The Setup Type window appears.
Select the type of installation. We recommend that you use the Typical installation. Click Next.
8
On a Windows 2000 computer, the InstallShield looks for the Windows 2000 L2TP (Layer 2
9
Tunneling Protocol) component. If the component is installed, the InstallShield does not install it
again. Click OK to continue.
The Select Components window appears.
Do not change the default selections. Click Next.
10
The Start Copying Files window appears.
Click Next to install the files.
11
A command prompt window appears during the installation. The command prompt can stay for
more than one minute. This is usual. After the file is installed, the command window closes
automatically and the installation continues.
After the installation is complete, click Finish.
12
218
.
Firebox X Edge e-Series