Configure Gateways Dialog Box; Configure Ipsec Tunnels Dialog Box - Watchguard Firebox X1000 Reference Manual

Configure Gateways dialog box

Configure IPSec Tunnels dialog box

Reference Guide
Configure Gateways
A list of all currently configured gateways. A gateway specifies a
point of connection for one or more tunnels.
Tunnels
Click to access the Configure Tunnels dialog box.
Add
Click to access the Remote Gateways dialog box where you can
configure new gateways.
Edit
Select a gateway from the list. Click Edit to access the Remote
Gateways dialog box and modify gateway settings.
Remove
Click to remove the selected gateway from the configured
gateway list.
OK
Closes this dialog box and saves any changes.
Gateway Name
Displays the gateway name.
Key Negotiation
Displays the key negotiation, either ISAKMP or Manual.
IP Address
Enter the IP address used for the IPSec tunnel.
Shared Key
Enter the shared key.
Tunnels
Lists the tunnels configured for IPSec.
Add
Click to add a tunnel.
Edit
Click to edit a tunnel.
Policy Manager
175