Table of Contents
Advertisement
Figure 170. Removing the M.2 backplane from the bracket
Loosen the captive screw with a screwdriver to disengage the M.2 backplane from the bracket.
Slightly slide the backplane forward, and remove it from the bracket.
2. Loosen the captive screw that secures the cable with a screwdriver, and disconnect the cable from
the backplane.
Figure 171. Disconnecting the cable from the M.2 backplane
3. Recycle the component in compliance with local regulations.
Demo video
ThinkSystem SR860 V2 Maintenance Manual
278
Advertisement
Table of Contents
