Table of Contents
Advertisement
– Nvidia Tesla V100s
– Nvidia Tesla T4
– 1610-8p NVMe switch adapter
• The following adapters must be installed in the PCIe riser assembly or 4U PCIe riser cages. See
adapter in the PCIe riser assembly" on page 191
257
for installation instructions.
– ThinkSystem Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter
– ThinkSystem Broadcom 57454 10/25GbE SFP28 4-port PCIe Ethernet Adapter V2
Install an adapter on the system board
Procedure
Step 1.
Open the retention latch.
Step 2.
If a filler has been installed in the PCIe slot, remove the screw that secures it, and remove the filler.
Step 3.
Align the adapter with the connector on the system board, and push it in.
Figure 80. Installing an adapter to the system board
Step 4.
Secure the adapter with a screw.
Step 5.
Close the retention latch.
Install an adapter in the PCIe riser assembly
Procedure
or
"Install an adapter into a 4U PCIe riser cage" on page
.
Chapter 4
Hardware replacement procedures
"Install an
191
Advertisement
Table of Contents
