Figure 53. Removing the front VGA cable
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install the front VGA assembly
Follow instructions in this section to install the front VGA assembly.
Attention:
• Go over
"Installation Guidelines" on page 137
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Procedure
Step 1.
Route the cable into the slot on the side of the server.
ThinkSystem SR860 V2 Maintenance Manual
164
to ensure that you work safely.