Table of Contents
Advertisement
Figure 132. Removing the USB front panel assembly
After this task is completed
• Install a replacement unit (see
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install the USB front panel module
Follow instructions in this section to install the USB front panel module.
About this task
Attention:
• Go over
"Installation Guidelines" on page 137
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Procedure
Step 1.
Align the USB front panel module with the bay on the front of the server, and slide it towards the
front of the server until it clicks in place.
ThinkSystem SR860 V2 Maintenance Manual
246
"Install the USB front panel module" on page
to ensure that you work safely.
246).
Advertisement
Table of Contents
