Lenovo ThinkSystem SR860 V2 Maintenance Manual page 189

– System air baffle (see
– Processor and memory expansion tray and expansion tray air baffle (see
2. Remove the expansion tray air baffle.
Figure 71. Removing the expansion tray air baffle
Step 2. Remove the memory module from the slot.
Figure 72. Removing a memory module
Open the retaining clip on each end of the memory module slot.
Grasp the memory module at both ends, and gently lift and remove it from the slot.
After this task is completed
1. Install a replacement unit (see
"Remove the system board air baffle" on page
the processor and memory expansion tray" on page
"Install a memory module" on page
219)
182).
.
Chapter 4 Hardware replacement procedures
226)
"Remove
181