Table of Contents
Advertisement
Figure 96. Removing the air baffle from the expansion tray
• If the processor is located on the system board:
1. Remove one of the following components.
– System air baffle (see
– Processor and memory expansion tray and expansion tray air baffle (see
2. Remove the expansion tray air baffle.
Figure 97. Removing the expansion tray air baffle
Step 2.
If the processor comes with a T-shaped heat sink, fully loosen the two heat sink screws as shown.
"Remove the system board air baffle" on page
the processor and memory expansion tray" on page
219)
.
Chapter 4
Hardware replacement procedures
226)
"Remove
209
Advertisement
Table of Contents
