Table of Contents
Advertisement
Figure 100. Separating a processor from the heat sink and carrier
Note: Do not touch the contacts on the processor.
a.
Lift the handle to release the processor from the carrier.
b.
Hold the processor by its edges; then, lift the processor from the heat sink and carrier.
c.
Without putting the processor down, wipe the thermal grease from the top of the processor
with an alcohol cleaning pad; then, place the processor on a static protective surface with the
processor-contact side up.
Step 2.
Separate the processor carrier from the heat sink.
Figure 101. Separating a processor carrier the from heat sink
Note: The processor carrier will be discarded and replaced with a new one.
a.
Release the retaining clips from the heat sink.
b.
Lift the carrier from the heat sink.
c.
Wipe the thermal grease from the bottom of the heat sink with an alcohol cleaning pad.
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Demo video
ThinkSystem SR860 V2 Maintenance Manual
212
Advertisement
Table of Contents
