Table of Contents
Advertisement
Figure 158. 7mm drive cage cable routing
Table 30. 7mm drive cage cables
7mm drive PCIe connector
1
After this task is completed
1. Fill the drive bays with 7mm drives or fillers (see
2. Proceed to complete the parts replacement (see
Demo video
Watch the procedure on YouTube
Install a 7mm drive
Follow the instructions in this section to install a 7mm drive.
About this task
Attention:
• Go over
"Installation Guidelines" on page 137
ThinkSystem SR860 V2 Maintenance Manual
268
7mm drive power connector
2
"Install a 7mm drive" on page
"Complete the parts replacement" on page
to ensure that you work safely.
268).
282).
Advertisement
Table of Contents
