Disassembling And Assembling The Thread Tension Plate - Dürkopp Adler D869 e-con Service Instructions Manual

Working basis
3.4.7
Fig. 14: Disassembling and assembling the thread tension plate (1)
(1) - Screws
(2) - Screw
Disassembling the thread tension plate
To disassemble the thread tension plate:
1. Switch off the machine.
2. Disassemble the front cover ( p. 20).
3. Pull plugs off the PCB:
Important
To pull off connection X12, flip up the bobbin case retainer (4).
Make sure not to lose the bobbin case retainer (4) as it will otherwise no
longer be possible to connect the push button.
4. Loosen screws (1) and (2).
5. Remove the thread tension plate (3).
Service Instructions D869 e-con - 00.0 - 09/2023

Disassembling and assembling the thread tension plate

①
②
• Thread clamp: Connection X10 (optional)
• Thread tension: Connection X11
• Push button: Connection X12
(3) - Thread tension plate
(4) - Flap
④
①
③
25