Setting The Sewing Foot Lift Parameters; Setting The Needle Thread Tension Parameters - Dürkopp Adler D869 e-con Service Instructions Manual

Programming

17.4.5 Setting the Sewing foot lift parameters

Various settings can be made for the sewing foot. The possibilities are
explained in more detail in the table.
Icon

17.4.6 Setting the Needle thread tension parameters

Various settings can be made for the needle thread tension.
The possibilities are explained in more detail in the table.
Icon
Service Instructions D869 e-con - 00.0 - 09/2023
Menu items
Max. sewing foot lift
Stepper motor speed
Speed at which the sewing feet will
be lifted.
Time till foot down
Duration till foot up after
motor stop in seam
Duration till foot up after
motor stop at seam end
Time till foot up
Menu items
Mode needle thread tension at
sewing foot lift
Mode 0
Needle thread tension is not lifted
Mode 1
The needle thread tension is lifted as
the sewing feet are lifted during sewing
Mode 2
The needle thread tension is lifted after
thread cutting
Mode 3
The needle thread tension is lifted as
the sewing feet are lifted during sewing
and after thread cutting
Value range
• Value range with
standard FA
01.0 – 20.0 [mm]
• Value range for KFA
01.0 – 18.0 [mm]
• Value range
01 - 60 [kHz]
• Value range
0.000 - 9.999 [s]
• Value range
0.000 - 9.999 [s]
• Value range
0.000 - 9.999 [s]
• Value range
0.000 - 9.999 [s]
Value range
• Value range
0, 1, 2, 3
123