Table of Contents
Advertisement
584 Breakdown assistance
Emergency
Removing the safety vest
There is a high-visibility waistcoat compartment
on the door shelves of all doors for storing a high-
visibility waistcoat.
To remove: pull out safety vest bag
#
2.
Open the safety vest bag
#
safety vest.
Replace: Fold up the safety vest, roll it up and
#
place it in the safety vest 1.
Slide the safety vest bag
#
edge of the armrest into the safety vest com-
partment. Ensure that the loop
so that it is easy to reach.
%
Remove the packaging film before sliding it
into the safety vest compartment for a new
safety vest. Otherwise, it may cause uninten-
tional slipping or make removing difficult.
Observe the legal requirements in the individ-
ual countries.
1
by loop
1
and pull out the
1
along the lower
2
hangs out
F118 0058 02
1
Maximum number of washes
2
Maximum wash temperature
3
Do not bleach
4
Do not iron
5
Do not tumble dry
6
Do not dry clean
7
Class 2 safety vest
The requirements defined by the legal standard
are only fulfilled if the safety vest is the correct
size and is fully closed.
Replace the safety vest in the following cases:
The reflective strips are damaged or dirty
R
Advertisement
Table of Contents
