Table of Contents
Advertisement
Turn the headlamp range adjuster to the posi-
#
tion that corresponds to the load condition of
your vehicle.
Operating the combination switch for the lights
1
High beam
2
Turn signal light, right
3
Headlamp flashing
4
Turn signal light, left
Use the combination switch to select the
#
desired function.
Switching on high beam
Turn the light switch to the L or Ã
#
position.
Push the combination switch in the direction
#
of arrow 1.
When high beam is activated, the indicator
lamp for low beam L will be deactivated
and replaced by the indicator lamp for high
beam K.
Switching off high beam
Push the combination switch in the direction
#
1
of arrow
or pull it in the direction of arrow
3.
Headlamp flashing
Pull the combination switch in the direction of
#
arrow 3.
F118 0058 02
Light and sight 211
Turn signal light
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow
2
or 4.
The corresponding turn signal light will flash
three times.
To indicate permanently: push the combina-
#
tion switch beyond the point of resistance in
the direction of arrow
2
or 4.
Advertisement
Table of Contents
