Table of Contents
Advertisement
504 MBUX multimedia system
To select recording mode: select
#
ing.
Loop recording
records several short video
files. When the memory is full, recording is
continued automatically. In doing so, other
files will be overwritten starting with the oldest
file.
To start: select
Start
recording.
#
The length of the recording is shown. The
not remove the storage medium during
recording. Before removing the storage
medium, eject it first.
message appears. The
video file is stored on the USB device.
To end: select
End
recording.
#
%
In some countries, geo-coordinates (longitude
and latitude) are shown in the video image.
For technical reasons, the geo-coordinates
may show greater inaccuracies.
A report may appear in the following cases:
The camera is not functional, the
R
unavailable
message appears.
Have the camera checked in a Mercedes-Benz
service centre.
Loop record-
If the country border indication has been
R
switched on (
If an outdoor recording is started with the
R
camera app during a dashcam recording, the
dashcam recording pauses and resumes auto-
matically after the camera recording is fin-
ished. A notification to this effect is displayed.
▌Starting or stopping individual recordings with
Do
the dashcam
Requirements:
For recording and saving a video file: a USB
R
device is connected with the multimedia sys-
tem (
page 553).
/
The vehicle is switched on.
R
Multimedia system:
©
4
5
If several USB devices are connected with the
#
multimedia system, select a USB device
Camera
(
page 503).
/
If no USB device is selected, a selection is
made automatically when recording starts.
page 505).
/
Apps
Dashcam
5
F118 0058 02
To select recording mode: select
#
recording.
Individual recording
stops recording when the
memory limit is reached. An individual record-
ing is automatically protected against being
overwritten.
To start: select
Start
recording.
#
The length of the recording is shown. The
not remove the storage medium during
recording. Before removing the storage
medium, eject it first.
message appears. The
video file is stored on the USB device.
To end: select
End
recording.
#
%
In some countries, geo-coordinates (longitude
and latitude) are shown in the video image.
For technical reasons, the geo-coordinates
may show greater inaccuracies.
A report may appear in the following cases:
Individual
recording: the memory is full or
R
there are only a few minutes recording time
available. The video recording stops or will be
stopped imminently.
Change the USB device or delete a video file.
Individual
Do
Advertisement
Table of Contents
