Table of Contents
Advertisement
298 Driving and parking
charging cable connected. This protects
the vehicle socket from dirt and damage.
Make sure that the socket cover is
#
closed properly before closing the socket
flap. This can otherwise result in damage
which may prevent the socket flap from
being opened again.
Requirements
The vehicle is unlocked, or the vehicle is
R
locked and the distance between the key and
the vehicle does not exceed 1 m.
Depending on the charging version, your vehicle is
equipped with one of the following vehicle sock-
ets:
Type 2 for AC charging (Mode 2/3)
R
Type Combo 2 for AC charging (Mode 2/3)
R
and DC charging (Mode 4)
Type Combo 2 vehicle socket (example)
%
Vehicles only equipped with a Type 2 vehicle
socket for AC charging have no charging inter-
ruption button 2.
F118 0058 02
Type Combo 2 vehicle socket: press the charg-
#
ing interruption button 2.
The charging process is ended. The % indi-
cator lamp
1
lights up white. The vehicle
socket is unlocked.
%
As an alternative, and only if the charging
interruption button
2
is not working, you can
unlock the vehicle with the vehicle key or cen-
trally from inside to end the charging process.
If the indicator lamp then %
white, the vehicle socket is unlocked for
around 30 seconds.
Type 2 vehicle socket: unlock the vehicle with
#
the vehicle key or centrally from inside.
The charging process is ended. The % indi-
cator lamp
1
lights up white. The vehicle
socket is unlocked for around 30 seconds.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
Close the socket cover and the socket flap.
#
1
lights up
Advertisement
Table of Contents
