Table of Contents
Advertisement
756 Technical data
Engine oil filling quantity (plug-in hybrid)
Model
CLA 250 e
The specified filling quantity refers to an oil
change with the oil filter.
▌Engine oil quality and filling capacity
(Mercedes-AMG vehicles)
Engine oil specification
Coupé and Shooting
MB-Freigabe or MB-
Brake
Mercedes-AMG CLA
229.71, 229.72
35 4MATIC
Mercedes-AMG CLA
45 S 4MATIC+
1) Recommended for the lowest possible fuel consumption (lowest SAE
viscosity class in each case; observe possible restrictions of the
approved SAE viscosity classes).
Mercedes-AMG CLA 45 S 4MATIC+: Use only
engine oils of viscosity class SAE 0W‑20.
Quantity
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil specifica-
4.5 litres
tions marked in the table with the lowest SAE vis-
cosity class. Observe any possible restrictions of
the approved SAE viscosity classes.
%
If the engine oils listed in the table are not
available, you may add a maximum of 1.0 l of
engine oils with MB-Freigabe or MB-Approval
229.51, 229.52, 229.61 or ACEA C5 once
only.
Engine oil filling capacity
Approval
Coupé and Shooting
1)
Brake
Mercedes-AMG CLA
229.71
35 4MATIC
Mercedes-AMG CLA
45 S 4MATIC+
The specified filling capacity refers to an oil
change with the oil filter.
Capacity
5.0 litres
5.8 litres
F118 0058 02
Notes on brake fluid
Observe the notes on operating fluids
(
page 747).
/
& WARNING Risk of an accident due to
vapour pockets forming in the brake sys-
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapour pockets may form in the brake system
when the brakes are applied hard.
This impairs the braking effect.
Have the brake fluid renewed at the
#
specified intervals.
Have the brake fluid regularly replaced at a quali-
fied specialist workshop.
Only use a brake fluid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
Advertisement
Table of Contents
