Table of Contents
Advertisement
Quick start and Tips
58
%
No more than three seconds may pass
between the V button and button
being pressed. The mirror adjustment will be
cancelled after three seconds.
Tips for on the move
▌Vehicle conditions for automatic engine stop or
start
Conditions for automatic engine stop:
The ECO start/stop function is switched on.
R
The brake system does not require a running
R
engine.
The outside temperature is within the range
R
that is suitable for the system.
The atmospheric air pressure is within the
R
range that is suitable for the system.
The engine is at normal operating tempera-
R
ture.
Engine diagnostics are not active.
R
The engine speed is within the range that is
R
suitable for the system.
The transmission oil temperature is within the
R
2
range that is suitable for the system.
The temperature in the vehicle interior is
R
within the set range.
The fuel tank is sufficiently full.
R
The system detects that there is no moisture
R
on the windscreen when the air conditioning
system is switched on.
The state of charge and the voltage of the bat-
R
tery are sufficient.
The battery temperature is within the range
R
that is suitable for the system.
The system does not detect a steep gradient.
R
The bonnet is closed.
R
Conditions for automatic engine start:
The vehicle is rolling.
R
The brake system requires a running engine.
R
The outside temperature has exceeded the
R
range that is suitable for the system.
The atmospheric air pressure has exceeded
R
the range that is suitable for the system.
F118 0058 02
Engine diagnostics require a running engine.
R
The transmission oil temperature has excee-
R
ded the range that is suitable for the system.
The temperature in the vehicle interior devi-
R
ates from the set range.
The system detects moisture on the wind-
R
screen when the air conditioning system is
switched on.
The state of charge of the battery is too low.
R
The battery temperature has exceeded the
R
range that is suitable for the system.
Good to know
▌Deactivating the function of the key
Vehicles with KEYLESS-GO: if you deactivate the
function of the key, the KEYLESS-GO functions are
also deactivated. Access or drive authorization via
KEYLESS-GO is then no longer possible with that
key. Activate the function of the key so that all of
its functions are available once again.
You can also deactivate the key's function to
reduce the key's energy consumption if you do
Advertisement
Table of Contents
