Table of Contents
Advertisement
134 Children in the vehicle – Securing the child restraint system
When fitting a child restraint system, also always
observe the following:
O Always observe the area of use and the suita-
bility of the seats for mounting a child
restraint system.
® ISOFIX mounting brackets
(
page 127).
/
or
° i‑Size mounting brackets (
page 129)
/
1
ISOFIX mounting bracket
2
i‑Size mounting brackets
Always be sure to check before every journey
#
that the ISOFIX child restraint system or the
i‑Size child restraint system is correctly locked
in place in both on-board mounting brackets.
F118 0058 02
* NOTE Damage to the seat belt for the
centre seat during installation of the child
restraint system
Make sure that the seat belt is not trap-
#
ped.
Attach the ISOFIX or i‑Size child restraint sys-
#
tem to both mounting brackets in the vehicle.
Fastening a Top Tether
& WARNING Risk of injury or death if the
rear seat backrests are not locked after
Top Tether belts are fitted
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
Always lock rear seat backrests after fit-
#
ting Top Tether belts.
Advertisement
Table of Contents
