Table of Contents
Advertisement
178 Seats and stowing
Fitting
Insert the head restraint such that the notches
#
on the bar are on the left when viewed in the
direction of travel.
Push the head restraint down until it engages.
#
Fold the rear seat backrest back until it
#
engages.
Setting automatic seat adjustment
& WARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat after
calling up a driver profile
Selecting a user profile may trigger an adjust-
ment of the driver's seat to the position saved
under the user profile. You or other vehicle
occupants could be injured in the process.
Make sure that when the position of driv-
#
er's seat is being adjusted using the mul-
timedia system, no people or body parts
are in the seat's range of movement.
If there is a risk of someone becoming trap-
ped, immediately stop the adjustment process
by:
a) Pressing the warning message on the
#
central display.
or
b) Pressing a position button of the
#
memory function or a seat adjustment
switch in the driver's door.
The adjustment process is stopped.
F118 0058 02
Multimedia system:
©
Comfort
Seat
4
5
5
Position seat automatically
5
Manually adjusting driver's seat and steering
wheel position to body size
The vehicle calculates a suitable driver's seat and
steering wheel position on the basis of the driver's
body size and sets this directly.
To set the unit of measurement: select
#
ft/in.
Set the size using the scale.
#
Start
positioning.
Select
#
The driver's seat and steering wheel position
is adjusted to the body size that has been set.
%
You can also configure these settings via the
Mercedes me user account for your user pro-
file. By synchronising the profiles in the vehi-
cle and the Mercedes me connect profiles,
you can carry over these settings for your
vehicle. Further information about synchronis-
ing user profiles (
page 437).
/
cm
or
Advertisement
Table of Contents
