Table of Contents
Advertisement
Run the engine of the assisting vehicle at
#
idling speed.
Connect the jump lead to the negative termi-
#
nal of the donor battery.
Connect the jump lead to the earth point
#
of your vehicle.
Start the engine of your vehicle.
#
Let the engine run for a few minutes.
#
Before disconnecting the jump leads, switch
#
on an electrical consumer in your vehicle, e.g.
the rear window heating or lights.
When the starting assistance has been comple-
ted:
Disconnect the jump lead from the earth point
#
3
of your vehicle.
Disconnect the jump lead from the negative
#
terminal of the donor battery.
Disconnect the jump lead from the positive
#
terminal of your own vehicle.
Disconnect the jump lead from the positive
#
terminal of the donor battery.
After removing the jump leads, close the cover
#
1
of the positive terminal 2.
Plug-in hybrid: if the vehicle has been jump-star-
ted, the electric drive system may not be available
3
for around 30 minutes.
Further information can be obtained at a qualified
specialist workshop.
Charging the 12 V battery
Connect the charging cable to the positive ter-
#
minal of your vehicle.
Connect the charging cable to the positive ter-
#
minal of the charger.
Connect the charging cable to the negative
#
terminal of the charger.
Connect the charging cable to the earth point
#
3
of your vehicle.
Start the charging procedure.
#
When the charging procedure has been comple-
ted:
Disconnect the charging cable from the earth
#
point
3
of your vehicle.
F118 0058 02
Quick start and Tips
Disconnect the charging cable from the nega-
#
tive terminal of the charger.
Disconnect the charging cable from the posi-
#
tive terminal of your vehicle.
Disconnect the charging cable from the posi-
#
tive terminal of the charger.
After removing the charging cables, close the
#
cover
1
of the positive terminal 2.
Notes on electrical fuses
& WARNING Risk of accident and injury due
to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric line could be overloaded.
This could result in a fire.
Always replace faulty fuses with speci-
#
fied new fuses containing the correct
amperage.
51
Advertisement
Table of Contents
