Mercedes-Benz CLA Shooting Brake 2023 Owner's Manual page 269

Configuring DYNAMIC SELECT in the multimedia
system
Multimedia system:
© Settings Vehicle
4 5 5
DYNAMIC SELECT
5
Setting drive program I
Select = Individual.
#
Select and set a category.
#
%
A sporty ESP mode can be set in conjunction
with a sporty suspension mode.
Setting the H drive program (plug-in hybrid)
Select Hybrid.
#
Select Route-based or Standard.
#
If route guidance is active and the
based
option has been activated, the electri-
cal energy is distributed intelligently over the
entire route. In built-up areas, electric mode is
preferred, while on the motorway the combus-
tion engine is used.
Standard
With the option, the vehicle drives in
its standard drive program (Î
n Hybrid). There is no distribution of elec-
trical energy over the entire route. The high-
voltage battery is exhausted and the vehicle is
then driven by the combustion engine.
Switching the reset display on/off
Activate or deactivate
#
%
This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user profile.
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an additional
prompt appears asking if the function should
Route-
remain deactivated.
%
The prompt appears only if the previously
active settings deviate from the standard set-
tings.
Function off: the next time the vehicle is started
the A drive program is set automatically. The
Electric or
Ask when starting.
F118 0058 02
Driving and parking 267
ECO start/stop function is activated automati-
cally.
Switching the reset display on/off (plug-in hybrid)
Activate or deactivate Ask when
#
%
This function must be activated for each user
profile separately. The drive program for the
respective user profile of the last driver is only
stored if this function is activated.
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored.
%
The prompt appears only if the previously
active settings deviate from the standard set-
tings.
Function off (plug-in hybrid): if the Î drive pro-
gram was the last one active, and all requirements
for the drive program are fulfilled, it will be selec-
ted automatically the next time the vehicle is star-
ted. If another drive program was active, then the
n drive program is set automatically.
starting.