Table of Contents
Advertisement
222 Light and sight
Switching the rear window wiper on/off
1
ô Single wipe/washing
2
è Intermittent wiping
Single wipe: press button
1
#
point of resistance.
Wiping with washer fluid: press button
#
beyond the point of resistance.
Switching intermittent wiping on/off: press
#
button 2.
The è symbol will appear on the driver's
display when the rear window wiper is
switched on.
Replacing the windscreen wiper blades
& WARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windscreen wipers
#
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
as far as the
Switch the vehicle on and then off again
#
immediately.
1
F118 0058 02
Within around 15 seconds, press and hold the
#
î button on the combination switch for
approximately three seconds (
The wiper arms will move into the replacement
position.
%
Check the condition of the wiper blades regu-
larly and replace them in the event of visible
damage or ongoing smearing.
Observe the information about the service
#
indicator.
page 221).
/
Advertisement
Table of Contents
