Table of Contents
Advertisement
580 Maintenance and care
Do not use dry cloths or abrasive or solvent-
R
based cleaning agents to clean the insides of
windows.
%
After changing the wiper blades or treating
the vehicle with wax, clean the windscreen
thoroughly with cleaning agents recommen-
ded for Mercedes-Benz. Failure to observe the
application instructions may result in damage,
smear marks or dazzling spots.
%
Remove external fogging or dirt on the wind-
screen in front of the multifunction camera.
Otherwise, driving systems and driving safety
systems may be impaired or unavailable
(
page 315).
/
Wiper blades
Move the wiper arms into the replacement
R
position (
page 27).
/
With the wiper arms folded out, clean the
R
wiper blades with a damp cloth.
%
Note that the wiper blades are coated. The
coating may leave residue on a cloth. Do not
rub the wiper blades excessively or clean
them too often.
Exterior lighting
Clean the lenses with a wet sponge and mild
R
cleaning agent, such as car shampoo.
Use only cleaning agents or cleaning cloths
R
that are suitable for plastic lenses.
Vehicle socket (high-voltage battery)
Use clean water and a soft cloth to clean the
R
vehicle socket.
Do not use high-pressure cleaners or cleaning
R
agents, such as soap.
Sensors
Clean the sensors in the front and rear part of
R
the vehicle with car shampoo, plenty of water
and a soft cloth (
page 315).
/
When using a high-pressure cleaner, maintain
R
a minimum distance of 30 cm.
Cameras
Open the camera cover with the multimedia
R
system (
page 372).
/
Use clean water and a soft cloth to clean the
R
camera lenses.
Do not use a high-pressure cleaner.
R
F118 0058 02
%
Remove external fogging or dirt on the wind-
screen in front of the multifunction camera.
Otherwise, driving systems and driving safety
systems may be impaired or unavailable
(
page 315).
/
Trailer hitch
Observe the notes on care in the trailer hitch
R
manufacturer's owner's manual.
Do not clean the ball neck with a high-pres-
R
sure cleaner or solvent.
Remove traces of rust on the ball, e.g. with a
R
wire brush.
Remove dirt with a lint-free cloth.
R
After cleaning, lightly oil or grease the ball
R
head.
%
Before using trailers with anti-swerve cou-
pling, note the manufacturer's owner's man-
ual.
Advertisement
Table of Contents
