Table of Contents
Advertisement
Emergency
Removing the safety vest
There is a safety vest compartment in the stow-
age compartments of all doors for storing a safety
vest.
To remove: pull out safety vest bag
#
2.
Open safety vest bag
#
safety vest.
To stow: fold the reflective safety jacket, roll it
#
up and stow it in safety jacket bag 1.
Slide safety jacket bag
#
edge of the armrest into the safety jacket
compartment. Meanwhile, ensure that loop
2
hangs out well within reach.
%
Remove a new reflective safety jacket from its
packaging material before sliding it into the
safety jacket compartment. The packaging
material may otherwise cause it to slip out or
make removing it difficult.
Observe the legal requirements in each coun-
try.
1
by loop
1
and pull out the
1
along the lower
1
Maximum number of washes
2
Maximum wash temperature
3
Do not bleach
4
Do not iron
5
Do not tumble dry
6
Do not dry clean
7
Class 2 safety vest
The requirements defined by the legal standard
are only fulfilled if the safety vest is the correct
size and is fully closed.
Replace the safety vest in the following cases:
The reflective strips are damaged or dirty
R
Breakdown assistance 303
Advertisement
Table of Contents
