Table of Contents
Advertisement
MARK FUNCTION
You can register up to 100 points with the location's latitude,
longitude, altitude, time, name, and icon in the Position
Memory List.
1 Press and hold [MARK].
The position memory store screen appears.
2 Select a position memory number.
3 Press [ENT].
The location information is registered.
When Overwriting
When selecting the already registered position memory
number, the overwrite confirmation screen appears.
4 Press [A/B].
The location information is overwritten.
POSITION MEMORY LIST
You can register the following location information up to 100
points in the Position Memory List.
You can edit all information except Registration time manually.
• Position name
• Icon (same as APRS)
• Registration time
• Longitude
• Latitude
• Altitude
Checking Registered Position Memory
1 Press [MARK].
The position memory list screen appears.
2 Select a list.
3 Press [ENT].
The position memory list details screen appears. Details of
the position memory can be checked.
• When pressing [F], the North Up display (displays North
as the top) changes to the Heading Up display (displays
the current travel direction as the top) or vice-versa.
4 Press [MODE].
The position memory list screen reappears.
Editing Position Memory
1 Press [MARK].
The position memory list screen appears.
2 Select a list.
3 Press [MENU].
The position memory list menu screen appears.
4 Select [Edit] or [New] and press [A/B].
The mode changes to position memory edit mode. The edit
menu items are as follows.
• Name (position name)
• Position (latitude and longitude)
• Icon
• Altitude
Editing the Name (Position Name)
1 Select [Name] and press [A/B].
The character input screen appears.
2 Select the characters.
For the detailed character input procedure, refer to page
No.6-1 " CHARACTER ENTRY ".
13-4
Advertisement
Table of Contents
