Displaying The Microsd Memory Card Information - Kenwood TH-D75E User Manual

2 Select [On].
Recording begins when PTT is pressed.
[Off]: Does not record the communication history.
[On]: Recording the communication history.
Stored files are named as follows.
• YYYYMMDD_HHMMSS.csv
Example: 20240512_125303.CSV
(Communication history from 12:53:03 on May 12, 2024)
The following table shows the items recorded to the
communication history.
Communication
history items
TX/RX Transmission/reception
Date Date (YYYY/MM/DD HH:MM)
Frequency Frequency (xxx.xxx.xxx)
Mode DV/FM/FM-N
My Latitude Latitude of own station when transmission/
reception (yy yy yy {N/S})
My Longitude Longitude of own station when transmission/
reception (yy yy yy {E/W})
My Altitude Altitude of own station when transmission/
reception
RF Power RF output (S-LOW/LOW1/LOW2/MID/HIGH)
S Meter Reception level
Caller Own station Callsign
Memo Memo
Called Other party Callsign
Rx RPT1 Access repeater Callsign
Rx RPT2 Other party repeater Callsign
Message Own station message
Repeater Control Broadcast impossible/No response/ACK/
Retransmission request/Repeater control/
Auto answer
BK Break communication
EMR Emergency communication
Fast Data 0: Normal Data / 1: Fast Data
Latitude Latitude of other station
Longitude Longitude of other station
Altitude Altitude of other station
Course Course of other station
Speed Speed of other station
Note:
¡ The saved format is TSV (tab separated text file).
¡ If the same file name exists, (n) is added to the end of the file
name and then the file is saved.
¡ The communication history can not be displayed on the
transceiver.
¡ A file of up to 2 GB can be saved per recording. If 2 GB is
exceeded, the excess data will be saved as another file.
¡ The location information are recorded when they are acquired.
Description
DISPLAYING THE microSD MEMORY CARD
INFORMATION
1 Access Menu No. 840.
The microSD memory card information screen appears.
Pressing [MODE] returns to the previous screen.
19-4