Table of Contents
Advertisement
21 FM RADIO
The transceiver can receive FM radio broadcasts. You can
listen to FM radio while simultaneously monitoring two
signals as well as while waiting for a CQ or a call from an
acquaintance, or waiting for an APRS call.
When the band A or B receives a signal (call from another
party) and squelch is open, the radio sound is muted so that
you can hear the other party's voice.
Note:
¡ You can not turn on the FM radio mode when selecting the
following frequency bands in band B. (LF/MF(AMBC), HF, 50,
FMBC)
¡ You can not turn on the FM radio mode when [priority scan]
(Menu No. 134) or [WX alert] (Menu No. 105) is On, and [Detect
Out Select] (Menu No. 102) is set to [IF] or [Detect].
TURNING ON FM RADIO MODE
1 Access Menu No. 700.
[On]: Turns on the FM radio function.
[Off]: Turns off the FM radio function.
When this is set to [On], the mode becomes FM radio
mode, the frequency screen appears, and the FM radio
icon <
> appears.
2 Select a frequency with [
Note:
¡ When you receive the signal of the band A or B while displaying
the FM radio mode screen, it switches to the frequency screen
or interrupt screen of the band A or B. A few seconds after
reception, the screen returns to FM radio mode.
[PTT]
¡ During transmission using
the band A/B frequency display screen. A few seconds after
transmission, the screen returns to FM radio mode.
¡ If you want to listen to the FM radio broadcast only, it is
recommended that you receive in the FM broadcast band in the
single band mode of the band B.
¡ When FM radio mode is On, Menu No.105, 134, 200, 203, 204,
210, and 220 can not be selected.
]/[ ] or [ENC] control.
, the screen switches to
Frequency Direct Entry (Direct Station Selection)
1 Press [ENT].
The mode becomes frequency direct input mode.
2 Enter a frequency using the number keys.
Radio Scan
1 Press [A/B].
The MHz dot flashes and scanning begins. Change the
scan direction with [
broadcast station with a signal is found, scanning stops
at that frequency, <<Tuned>> is displayed, and scanning
ends.
2 Press [A/B], and Radio scan stops.
EDITING THE FM RADIO MEMORY CHANNEL LIST
FM broadcast stations for up to ten channels can be
registered to the FM radio memory channel list. You can
assign names and edit the registered broadcast stations.
Registering FM Radio Stations
Register the FM radio stations you listen to frequently to FM
radio memory channels.
1 Switch to FM radio mode and select a broadcast station
you wish to register.
2 Press [F], [MR].
The store in the FM radio memory channel screen
appears.
21-1
]/[ ] or [ENC] control. When a
Advertisement
Table of Contents
