Reverse Function; Tone And Ctcss Operation - Kenwood TM-701A Instruction Manual

4-6. REPEATER OPERATIONS
4-6-1.Transmitter Offsets
All amateur radio repeaters utilize a separate receive and
transmit frequency. The receiver frequency may be either
above or below that of the transmit frequency. The config-
uration of most repeater will fall into one of the categories
listed below:
TM-TO1A TM-701E UHF band
eee UHF band Euronsen| U.K. version
version
it +600 kHz +5 MHz +1.6 MHz
- —600 kHz —5 MHz — 1.6 MHz — 1.6 MHz
== —7.6 MHz
Offset Direction
To select the desired transmitter offset direction press the
SHIFT key. Each time you press the key the transceiver will
advance from one direction to the other, i.e.' + ''to''—"
("—"" to ''——"'
with European versions) to no offset
(simplex).
Automatic Offset Selection (U.S.A. version)
145.1 145.5 146.0 146.4 146.6 147.0 147.4 147.6 148.0
S: simplex
4-6-2. Reverse Function
4-6-3. Tone and CTCSS operation
27