Output Destination Interface (Usb/Bluetooth) - Kenwood TH-D75E User Manual

Setting the Altitude, Rainfall
1 Access Menu No. 971.
2 Select [feet, inch] or [m, mm].
Setting the Temperature
1 Access Menu No. 972.
2 Select [°F] or [°C].
Setting the Latitude longitude
1 Access Menu No. 973.
2 Select [dd°mm.mm' ], or [dd°mm'ss.s" "].
Setting the Grid Square Format
1 Access Menu No. 974.
2 Select [Maidenhead Grid], [SAR Grid (CONV)], or [SAR
Grid (CELL)].
[Maidenhead Grid]: This Grid Square format is commonly
used in amateur radio.
[SAR Grid (CONV)]: Conventional format (old format) for
Search & Rescue (old format) is used in the United States.
[SAR Grid (CELL)]: Cell format (new format) for Search &
Rescue is used in the United States.

OUTPUT DESTINATION INTERFACE (USB/Bluetooth)

Set the interface to use for each of the following applications.
Select [USB] or [Bluetooth].
• GPS data (NMEA) output
• APRS packet output
• KISS mode (input and output)
• DV/DR mode (input and output)
• DV Gateway mode (input and output)
Setting the PC Output (GPS) Interface
1 Access Menu No. 981.
2 Select [USB] or [Bluetooth].
Setting the PC Output (APRS) Interface
1 Access Menu No. 982.
2 Select [USB] or [Bluetooth].
Setting the Data Band (KISS) Interface
1 Access Menu No. 983.
2 Select [USB] or [Bluetooth].
Setting the Data Band (DV/DR) Interface
1 Access Menu No. 984.
2 Select [USB] or [Bluetooth].
12-12