Button Function Display; Basic State Display Labels; Labels After Pressing [F]; Labels After Pressing [F] For More Than - Kenwood TM-733A Instruction Manual

BUTTON FUNCTION DISPLAY
cual isa. nie OT DISseBcse ratedotsa stepeSosezr anceBe
LO SHIFT TONE REV GI MUTE
Ss CS © eS SJ)
Some of the Front Panel buttons have several
functions. This allows us to provide many functions on
your transceiver but keep the transceiver case small.
To simplify operation, the lower portion of the Display
has labels that indicate the current function of each of
the 6 buttons on the lower edge of the Front Panel. The
label appears immediately above its corresponding
button.
When using any of the alternate functions of the
multiple function buttons, you have 10 seconds to
select an alternate function after pressing the
[F] button. Pressing [F] again or waiting for 10 seconds
restores the Basic state with button definitions of
[CALL], [LOW], [SHIFT], [TONE], [REV], and [MUTE].
24
m Basic State Display Labels
SALL LOW SHIFT TONE REV MUTE
Boeboea
m Labels After Pressing [F]
ae Sa eS =) S&S
m Labels After Pressing [F]
for More than 1 Second
mg Programmable Memory Recall Labels
a 2 3 4
GOW