Table of Contents
Advertisement
TRANSCEIVER RESET
There are 3 types of transceiver reset available:
VFO Reset
Use to initialize the VFO and accompanying settings.
Partial Reset
Use to initialize all settings other than the Memory channels,
and the DTMF memory channels.
Full Reset
Use to initialize all transceiver settings that you have
customized. (Date and time are not reset.)
There are 2 ways to perform a reset on the transceiver: by key
operation and by accessing Menu mode.
Key Operation
1 Turn the transceiver power OFF.
2 Press [F] + Power ON until reset screen appears.
3 Select your desired reset type: [VFO Reset], [Partial
Reset], or [Full Reset].
4 Press [A/B] to set the reset type.
A confirmation message appears on the display.
5 Press [A/B] again to perform the reset.
Menu Mode
1 Access Menu No. 999.
2 Select your desired reset type: [VFO Reset], [Partial
Reset], or [Full Reset].
Note:
¡ Press [PF2] + Power ON to set the voice guidance to
Auto1 after Full Reset.
12-14
Advertisement
Table of Contents
