Dual Tone Multi-Frequency(Dtmf); Manual Dialing; Automatic Dialer - Kenwood TH-D75E User Manual

Hide thumbs Also See for TH-D75E:
Table of Contents

Advertisement

11 DUAL TONE MULTI-FREQUENCY(DTMF)

The keys on the keypad function as DTMF keys; the 12 keys
found on a push-button telephone plus 4 additional keys (A,
B, C, D). This transceiver provides 10 dedicated memory
channels. You can store a DTMF code with up to 16 digits.
Some repeaters in the U.S.A. and Canada offer a service
called Autopatch. You can access the public telephone
network via such a repeater by sending DTMF tones. For
further information, consult your local repeater reference.

MANUAL DIALING

Manual Dialing requires only two steps to send DTMF tones.
1 Press and hold [PTT].
2 Press the keys in sequence on the keypad to send DTMF
tones.
The corresponding DTMF tones are transmitted.
If the DTMF Hold function is activated, you do not need
hold down [PTT] while pressing keys. After transmitting
the first tone (by pressing [PTT] and the first key),
pressing additional keys will keep the transceiver in
transmit mode for 2 seconds.
Selecting a Transmit Speed
Some repeaters may not respond correctly if a DTMF code is
transmitted at fast speed. If this happens, change the DTMF
code transmission speed.
1 Access Menu No. 160.
2 Select [50], [100], or [150] msec.
Selecting a Pause Duration
You can change the pause duration stored in DTMF Memory
channels.
1 Access Menu No. 161.
2 Select [100], [250], [500], [750], [1000], [1500], or [2000]
msec.
DTMF Hold
Activate this function to remain in transmit mode, after
beginning to press keys when making a call.
1 Access Menu No. 162.
2 Set DTMF Hold to [On] to continue transmitting when
pressing keys.
Set this menu to [Off] to stop the 2 second continuous
transmission.

AUTOMATIC DIALER

There are 10 dedicated DTMF Memory channels available
to store DTMF codes. You can store up to 16 digits in each
channel.
Storing a DTMF Code in Memory
1 Access Menu No. 163.
2 Select a channel number, then press [ENT].
The name entry display appears.
3 Enter a name for the channel, then press [ENT] to set it.
4 Press [ENT].
The code entry display appears.
11-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-d75a

Table of Contents