Programming A Packet Path - Kenwood TH-D75E User Manual

PROGRAMMING A PACKET PATH

Select the packet path type from [New-N], [Relay], [Region],
[Others1], [Others2], or [Others3].
When you press [A/B], the <
right side of the packet path type, showing the current used
information.
1 Access Menu No. 504.
[New-N]:
This digipeat type has been used mainly in North America, but
is now used worldwide.
1 Select <Type> to [New-N], and press [A/B].
2 Select <WIDE 1-1> to [Off] or [On].
• Set <WIDE 1-1> to [On] to use the digipeater of the
<RELAY type (Fill-in type) with the New-N.
• When set to [On], 1 packet path in addition to RELAY
can be used, as per the <Total Hops> setting.
3 Select the relay step number for the <Total Hops> setting.
• You can confirm the setting contents in [ ].
[Relay]:
This is one of the digipeat types used in Europe.
1 Select the <Type> to [Relay], and press [A/B].
2 Select <RELAY> to [Off] or [On].
• Set <RELAY> to [On] to use the digipeater of the Fill-in
type (RELAY type) with the <Relay>.
• When set to [On], 1 packet path in addition to RELAY
can be used, as per the <Total Hops> setting.
> indicator appears on the
3 Select the relay step number for the <Total Hops> setting.
• You can confirm the setting contents in [ ].
[Region]:
Use this method when the packet is being relayed within only
a limited area.
Packet paths are specified using ABBR (abbreviations). (In
America, for example, CA represents California, AZ represents
Arizona, etc.)
1 Select the <Type> to [Region], and press [A/B].
2 Using the ABBR setting, enter an abbreviation of up to 5
characters.
3 Select the relay step number for the <Total Hops> setting.
• You can confirm the setting contents in [ ].
[Others]:
Use this method when the relay path is specified to an
individual.
When a character string is not entered, the packet data is not
relayed.
1 Select the <Type> to [Others1], [Others2], or [Others3] and
press [A/B].
14-11