Table of Contents
Advertisement
RX BREAK-IN DISPLAY
This function is to display information received from other
station in a Break-In screen. Received information is displayed
in a Break-In screen in the operation band.
RX Break-In Display Method
This function is to set the method to display a Break-In screen
(display a Break-In only when the received signal is to your
Callsign, or display a Break-In for all received signals, etc.).
1 Access Menu No. 640.
2 Select [Off], [All], [Related to DSQ], or [My Station Only].
[Off]: Displays a one-line indication (D-STAR icon and
Callsign) for all received calls.
[All]: Displays a Break-In for all received signals.
[Related to DSQ]: Displays a Break-In when the Callsign
squelch or Code squelch matches.
[My Station Only]: Displays a Break-In to your station
only.
RX Break-In Display Size
This function is to select a display size when displaying
information received from the other party (Callsign, message,
etc.) as a Break-In display.
Single Band
1 Access Menu No. 641.
2 Select [Half Display] or [Entire Display].
Dual Band
1 Access Menu No. 642.
2 Select [Half Display] or [Entire Display].
RX Break-In Display Hold Time
This function is to select the hold time to display the Break-In
after RX ends. When the set time elapses, the Break-In screen
automatically disappears.
1 Access Menu No. 643.
2 Select [0], [3], [5], [10], [20], [30], [60] seconds or [Infinite].
Note:
¡ If 0 second is selected, the RX Break-In screen disappears
when RX ends.
¡ When there are multiple RX Break-In, only the most recent RX
Break-In is displayed.
GPS data display
This function is to select the hold time to display the Break-In
after RX ends. When the set time elapses, the Break-In screen
automatically disappears.
1 Press [A/B] to display the location information of the
opponent's station.
If the received GPS data is the APRS sentence, the icon
set by the opponent's office is also displayed.
CALLSIGN ANNOUNCE
This function is to announce the Callsign when a D-STAR
signal is received. It enables you to know the Callsign without
looking at the screen.
1 Access Menu No. 644.
2 Select [Off], [Kerchunk], [Except Kerchunk], [My Station
Only], or [All].
[Off]: Does not announce the Callsign.
[Kerchunk]: Announces the Callsign when the reception
is within 2 seconds.
[Except Kerchunk]: Announces the Callsign when the
reception is over 2 seconds.
[My Station Only]: Announces the Callsign for the
reception to your station only.
[All]: Announces the Callsign for all receptions.
Note:
¡ If the received audio is not output because the digital squelch
does not match, the Callsign is not announced.
¡ Memo in the Callsign is not announced.
¡ The Callsign Announce (menu No. 644) operates regardless of
the Voice Guidance mode setting (menu No. 916).
16-12
Advertisement
Table of Contents
