Modulation Mode Audible Indicator; Morse Code Alarm Output; Display Dimmer - Kenwood TM-255A Instruction Manual

7 AUXILIARY FUNCTIONS
MODULATION MODE AUDIBLE INDICATOR
This handy function alerts you audibly by either Morse
code or a single beep each time a new modulation
mode is selected. When Morse code is selected, the
first letter of the selected mode is sent as a
confirmation signal.
Select the audible indicator you prefer via Menu B,
No. 51 {page 14}. The default is Morse code (ON).
Modulation Mode Morse Code Letter
MORSE CODE ALARM OUTPUT
The Morse Code Alarm will alert you automatically in
the following cases:
« Attempting to search for a memory channel if all
memory channels are empty.
« Attempting to search for an empty memory
channel if there are no free memory channels.
* Pressing [SCAN] while the transceiver is ina
mode that does not allow Scan to be initiated.
Menu B, No. 52 allows you to select either Morse
Code or Beep output for this function. When Morse
Code is selected, the word "CHECK" is sent as the
alarm signal. The default is Morse Code (ON).
DISPLAY DIMMER
Display Brightness is selected using Menu A, No. 00.
There are 4 levels of illumination plus OFF. The
default is d2 (second brightest illumination).
39